Menu functions > 31
EPSON FX
Setup
Character
Pitch
10 CPI/
12 CPI/
17 CPI
20 CPI/
Proportional
Specifies character pitch in Epson FX emulation.
Character
Set
SET-2
SET-1
Sets a character set.
Symbol Set
IBM 437
Sets the Symbol Set for Epson FX Emulation.
(see machine operator panel for complete list).
Letter O
Style
Enable/
Disable
Specifies the style that replaces ø (9B) and ¥ (9D) with ø
(ou) and Ø (zero).
Zero
Character
Normal
/Slashed
Specifies the style of 0(zero). SLASHED: SLASH ZERO
Line Pitch
6
/8 LPI
Sets line space.
White Page
Skip
On/
Off
Sets whether to eject a blank sheet. Available only when
simplex is set.
CR Function
CR
/CR+LF
Sets action when CR code is received.
Line Length
80
/136 Column
Specifies the number of characters per line.
Form Length
11/
11.7
/12 inch
Specifies the length of paper.
TOF Position
0.0
/0.1/~1.0
inch
Sets the position from the top edge of paper.
Left Margin
0.0
/0.1/~1.0
inch
Sets the amount to shift the horizontal print start position
to the right.
Fit to Letter
Enable/
Disable
Sets the printing mode that can fit print data, equivalent
to 11 inches (66 lines), in the LETTER-size printable area.
Text Height
Same
/Diff
Sets height of a character.
SAME: Regardless of CPI, same height
DIFF: According to CPI, character heights vary.
Color Setup
Ink
Simulation
Off
SWOP
Euroscale
Japan
The machine has its own process simulation engine which
simulates standard colors in the printer.
This function is available only with PS language jobs.
UCR
Low
Medium
High
Selects limitation to the toner layer thickness.
If paper curl occurs in dark printing, selecting MEDIUM or
LIGHT sometimes helps reduce this curl.
UCR = Under Color Removal.
CMY 100%
Density
Enable/
Disable
Enable/Disable 100% output against the CMY100% TRC
compensation. Ordinarily, the TRC compensation function
holds control for the appropriate print density; thus 100%
output is not always possible.
Selecting ENABLE will enable 100% output in any
individual color. The actual print, including the TRC
compensation function is limited to an appropriate area.
This function is for special purposes such as specification
in CMYK color reduction in PS.
CMYK
Conversion
On
/Off
Setting to “OFF” will simplify the conversion process of
CMYK data, which will reduce the processing time.
This setting is ignored when Ink Simulation function is
used.
PS only
ITEM
SETTINGS
EXPLANATION
