C5500n User’s Guide
Printer takes a long time to start printing • 140
Printer takes a long time to start printing
Printing cancels ___________________
Possible cause
Remedy
The printer has to
warm up returning
from power save mode.
In the printer menu settings, set power save to
a higher value to increase the length of time
before entering power save mode (SYS CONFIG
MENU
→
POW
SAVE
TIME).
The image drum
carries out a cleaning
process to ensure print
quality, which takes
time.
Wait until this process has been completed.
The fuser unit adjusts
temperature, which
takes time.
Wait until this process has been completed.
The printer is
processing data from
another interface.
Wait until this data is processed.
Possible cause
Remedy
The printer interface
cable is faulty.
Replace the printer interface cable.
The time out setting is
too short.
Reset time out in the menu to a higher value
(SYS CONFIG MENU
→
WAIT
TIMEOUT).
Содержание C5500n Series
