Oki B6100n, Руководство по настройке

Страница: 15 / 54

Ethernet Network Interface Card Configuration Guide 2-7
NOTE: If no router is present on the network, the NIC will not accept AppleTalk print jobs for 60 seconds
after booting.
AppleTalk Host Troubleshooting
LAT Configuration
7KH(=:HE&RQFRQILJXUDWLRQVRIWZDUHLVWKHHDVLHVWZD\WRFRQILJXUHWKH1,&7KHIROORZLQJVHFWLRQV
FRYHURWKHUSULQWFRQILJXUDWLRQPHWKRGVIRU/$7KRVWV
NOTE: The NIC needs an IP address before you can use EZWebCon. See “Setting the IP Address” on page
2-11.
/$7SULQWTXHXHVFDQEHFUHDWHGE\SULQWLQJWRDSRUWRUSULQWLQJWRDVHUYLFH3ULQWLQJGLUHFWO\WRDSRUW
UHTXLUHVQR1,&FRQILJXUDWLRQ
NOTE: Printing directly to a port is the easiest method for printing to the NIC.
Printing Directly to a Port
1 .
&UHDWHD/$7DSSOLFDWLRQSRUWWKDWUHIHUHQFHVWKH1,&SRUW
2.
&UHDWHDQGVWDUWDSULQWTXHXHWKDWXVHVWKH/$7DSSOLFDWLRQSRUW
3.
$GGWKHFRPPDQGVWRWKH6<60$1$*(5/$767$5783&20ILOHVRWKHUHTXLUHG/$7GHYLFHV
ZLOOEHUHFUHDWHGDIWHUHDFKKRVWUHERRW
NOTE: LAT terminal device characteristics may have to be changed to correctly print certain files. See
your VMS documentation for more information.
4.
3ULQWWRWKHTXHXH
Area to Check Explanation
The printer is available to be
selected in the Chooser Make sure the printer is in the right zone.
$ RUN SYS$SYSTEM:LATCP
LATCP> CREATE PORT LTAnnn/APPLICATION
LATCP> SET PORT LTAnnn/NODE=PRQ_xxxxxx/PORT=Port_n
LATCP> EXIT
$ INITIALIZE/QUEUE/START/ON=LTAnnn:/PROCESSOR=LATSYM
/RETAIN=ERROR queue_name
$ PRINT/QUEUE=queue_name filename.txt