Okayo UHF-PLL EJ-701DR-PLUS, Руководство пользователя

Страница: 8 / 16

7
Press Up and Down Frequency Selector keys simultaneously on DR-500
module 1 for more than 1 second, you could find two available channels
.
“ ” “ ” (3)
4. Using two wireless receiver modules simultaneously DR-500 :
Switch on two Transmitters used for Wireless Receiver Module 1 and adjust
the channel number accordingly.
Press Up
Frequency Selector key on Wireless Receiver Module 2 for more
than 1 second, you could find available channel for Channel A.
“ ” (3)
Switch on the third Transmitter used for Wireless Receiver Module 2 and adjust
the channel number
accordingly.
Press Down Frequency Selector key (3) on Wireless Receiver Module 2 for more
than 1 second, you could find available channel for Channel B.
“ ”
Switch on the forth Transmitter. Finalize the process of four channels used
simultaneously.
Setting of Group Number and SQ Value
1. Press “Set” key (4) and then switch on Channel A or Channel B to enter Group
and then LCD window would show (number will keep blinking).
setting,
2. Press “Up” or “Down” Frequency Selector keys (3) to look for your preferred
group number.
3. Press ”SET” key (4) to confirm the group setting or wait for 5 seconds to confirm
it automatically and then enter setting mode of SQ value.
4. Under setting mode of SQ value, LCD window will show (number will keep
blinking).
5. Press “Up” or “Down” Frequency
Selector keys (3) to choose SQ value the value
will not be set in circulation.
,
6. Press “SET” key (4) again to confirm the group setting or wait for 5 seconds to
confirm it automatically and then back to normal switching-on mode.
Please keep the distance between the Transmitter and the Receiver more than M 2 .
Please keep the distance between the Transmitter and the Transmitter more than
0.5 M.
2. Press Up Frequency Selector key for more than second and then LCD window
will show , Channel A would be switched to available channel automatically.
If there is no channel available, the channel value would be kept the same.
“ ” (3) 1 ,
3. Press Down Frequency Selector key for more than second and then LCD
window will show , Channel B would be switched to available channel
automatically. If there is no channel available, the channel value would be kept
the same.
“ ” (3) 1 ,
A
B
CAUTION!
Wireless Receiver Module DR-500
6