Okayo GPA-650B, Руководство пользователя

Страница: 13 / 20

LCD screen will display current used volume level when press or (VOL.
1
~ 3).
Select output power/Maximum available channels
1. On OFF mode, press SET and POWER button to enter into the selection mode.
2. LCD screen will display maximum available channels; 640 -664 MHz, 794-806
MHz and 863-865 MHz. Press or to select preferred channel.
3. Press SET button to confirm and select, or it will confirm in 5 seconds without
any keys pressed.
4. LCD screen will display Hi / Lo, press or to select preferred output power.
5. Press SET button to confirm and select or to wait for 5 seconds without any
keys pressed.
Volume switch
Charging mode
1. LED lights red when charging.
2. LED lights green when battery is fully charged.
3. When device is slot into a charger stand, will off the power.
4. Battery error: LED status lights red and flashes when charging,
LCD battery symbol lights flashes, and it caused by:
o
(1) The battery charge temperature is exceeded 60 C.
(2)The duration of charging time for charger stand is exceeded seven hours.
(3)The battery is defected.
Frequency synchronization
1. When power is on, it will synchronize frequency or switch off without receiving
audio signal when exceeded upto ten minutes. When synchronization, MUTE
indicator lights blue / flashes and LCD backlit lights up.
2. Press MUTE button when channel is displayed on screen, enter into the synch-
ronization mode or off without receiving audio signal exceeded upto twenty
seconds.
3. When succeed, it will switch to MUTE mode and LED lights red.
To reset mode, press / at the same time and switch the power on.
Others
Pendant/Bodypack Transmitter EJ-5T