Portable PA System
DR-701 Wireless Microphone Module - Figure 3.
The portable PA system can be equipped with one or two UHF microphone modules. Each module features 96 selec-
table channels for interference free operation with multiple microphones or PA systems.
(See page 7 for installation guidelines for this module)
1. Turn the power switch / volume knob clockwise to turn the receiver unit on.
2. The LCD screen will display "On" then revert to the factory default channel (or the channel last selected).
3. To select a channel, press the "SET" button. Using the UP / DOWN frequency adjustment buttons, you can set the
receiver to match the channel used by the transmitter.
4. Adjust the volume level to the desired position.
5. The module is now ready to receive signal from either a handheld of bodypack transmitter. When receiving signal,
the A / B diversity indicator will illuminate red or green to show the diversity status. The RX indicator will illuminate
when signal from the transmitter is being received. The AF indicator displays audio level when users are speaking
into the microphone.
CD / MP3 Player - Figure 4.
This anti-shock CD / MP3 player allows playback of both standard CD's and data CD's containing MP3 files.
1. To operate push the power button. Insert a CD into the CD slot and press play / pause button.
2. Adjust volume to desired level.
3. To skip forward a whole track, press the next track button (>>l). To skip backwards a whole track, press the previous
track button (l<<). To search through tracks, press and hold either of these buttons until you reach the desired point in
the sound track.
4. Repeat allows repeating of single songs or all songs. Shuffle plays tracks in a random order.
5. To program specific tracks for palyback, press the track program button. Select the song you wish to program on the
disc using the next track (>>l) and previous track buttons (<<l). Press repeat to enter the track into the program.
Repeat as necessary. To playback programmed tracks, press the play/ pause button. Note: program will be reset
whenever the track program button is pressed.
6. For use with MP3 discs, you can select folders of music on the CD. Press the folder button and use the next track
(>>l) and previous track button(l<<) to select your desired folder. Note: this function searches the disc in the alphanu-
meric order.
TX-701 Audio Link Transmitter Module - Figure 5.
For larger venues or audiences, the addition of this module allows several units to be used in the same area without
the need for speaker or signal wiring. In this application, you have a master and as many slave units as required for
the venue. The wireless link module is fitted to the master unit which then transmits any audio signal (including
wireless mic, CD player or wired mic) to the slave units, which are fitted with a UHF wireless microphone receiver.
(See page 7 for installation guidelines for this module)
1. On the master unit turn the power switch / volume level control clockwise to turn the transmitter on.
2. The LCD screen will display "On" then revert to the factory default channel (or the channel last selected).
3. To select a channel press the "SET" button. Using the UP / DOWN frequency adjustment buttons, you can select the
desired channel.
4. On the slave unit, turn the UHF receiver module on. Press "SET" and user the UP / DOWN frequency adjustment
buttons to set the unit to the same channel as the master unit.
5. When transmitting audio from the master to slave unit, the TX indicator will light green. The AF indicator displays
audio level when user's are speaking into the microphone or music is playing.
5