Okamura MC, Инструкция по эксплуатации, Страница: 3 / 8

2
Safety Instructions (Make sure to follow these instructions)
Installation
●
Many chemical substances will be released by the product when it is first purchased. Sufficiently
ventilate or expose the product to moving air for some time after purchasing it.
●
Do not completely close windows when using the product in rooms with conspicuously high
temperatures/humidity (the benchmarks for these are temperatures in excess of 28
°
C (82.4
°
F) and
relative humidity in excess of 50%).
Appropriate Ventilation Measures
Caution
Wheels
●
The wheels are consumable parts. Wheel
replacement is available for a fee. Contact our
Customer Service.
●
The soft wheels change over time due
to the effects of hydrolysis, mold growth,
ultraviolet rays, etc., causing deterioration
such as crack and peeling. The speed of soft
wheel aging greatly varies depending on your
environment. If you find any deterioration,
you are recommended to replace the wheels
concerned as early as possible.
For P tile floor, wooden floor
●
Hard caster(Nylon wheels) may slide too
well to cause the chair to fall. Use Soft
caster((urethane wheels). The nylon wheels are
suited for floors covered with rugs or carpets.
Soft caster Hard caster
Do not place on uneven floor.
Indoor use only. Avoid direct sunlight
●
No outdoor or waterfront use.
Avoid high temperature, high humidity,
or extraordinary aridity.
●
When placing alongside windows, use curtains
or blinds to avoid direct sunlight.
●
Make sure to place the product on an even
floor when using. Failure may cause the
product to deform or to be damaged.
Do not place product under heater
or airconditioner exhausting high
temperature air.
Please follow instructions below. Failure may cause serious damage to the product and
Okamura will have no responsibility for any damages.