2
3
●
Many chemical substances will be released by the product when it is first purchased. Sufficiently
ventilate or expose the product to moving air for some time after purchasing it.
●
Do not completely close windows when using the product in rooms with conspicuously high temperatures/
humidity (the benchmarks for these are temperatures in excess of 28°C and relative humidity in excess of 50%).
Operation guide
Installation Instructions
Names of Parts
Appropriate ventilation measures
We are not responsible for any malfunction resulted from failure to observe the
following precautions.
Use the product indoors.
●
Do not use outdoors or places with water, as
exposure to moisture could result in problems
such as warping or the growth of mold.
Avoid keeping the product in direct sunlight
as this could result in warping or fading of
colors due to exposure to the sun.
Install the product so that its level surface
is maintained.
Avoid placing the product in places exposed
to high temperatures, humidity, or exceptional
dryness as this can result in warping, color
changes, or the growth of mold.
Avoid placing the product where it will be
directly exposed to heat or moving air such
as by stoves, air conditioners, or the like as
this could result in warping or color changes.
●
Always use curtains, blinds, or the like to
protect the product from direct sunlight
when installing it next to windows or the like.
●
Maintain the level surface of the main unit
when installing the product. If the product is
installed without its level surface maintained,
the main unit may become skewed, resulting in
malfunction of moving parts.
●
Use the adjuster to adjust the surface so that
it is level with the floor surface.
Materials
Tabletop
rises
Tabletop
lowers
mouse pad
Cable guard
（optional）
Adjuster
Tabletop
Legs
■ High type
■ Low type
Wiring unit tabletop
（optional）
Adjuster
Tabletop
Legs
Cable guard （optional）
■Using the adjuster
Table height can be adjusted by a range
of 0〜12mm by turning the adjuster of
the leg tip.
Use this adjuster to maintain the level
surface of the product when installing.
■Mouse utilization precautions
The optical mouse operates based on changes to light reflectivity. Its operations
may become unstable if directly used on the tabletop, so use the mouse pad.
［Surfaces that may cause unstable operation］
●
Glass or plastic surfaces, lustrous
surfaces such as those with a mirror
finish, or other surfaces that reflect light.
●
Stripe designs or patterns with clearly
defined light and dark areas.
●
Surfaces with continuous consistent
patterns, such as surfaces printed with dots.
●
Surfaces with special forms of processing,
such as 3D or holographic.
■About wiring
Refer to the included instruction manual for cable guard and wiring unit manual.
The adjustment operation must be
conducted by at least 2 people in
order to prevent hands, fingers, or
the like from getting pinched.
Caution
Part
Main materials
Tabletop
Surface materials
Decorative melamine laminate
Core materials
Particleboard, paper, lauan
Edging materials
Olefin type elastomer
Legs
Props
Aluminum
Supporting base / upper arm
Aluminum
Main unit
Aluminum 〉AL〈
Adjuster
PA6
Connecting conduit
Steel
※ 〉○○〈 indicates the materials of the parts. This information is useful when recycling.
※ Please understand that product specifications might change without prior notification when
improvements are made to the product.