Okamura drape, Инструкция по применению

Страница: 3 / 4

3 4
For daily care
Parts Name
Option (North American model)
＊ No chairs are included.
Leveler
Table top
Wall light
(Option)
Vertical wiring duct for
the wall light
(Option)
Vertical wiring duct
(Option)
Wire management tray
<Under tabletop>
●
Brush with a soft brush or tap the surface softly and
vacuum to remove dust to avoid damaging the cloth.
●When it gets dirty after extended period f time,
wipe with a well wrung soft cloth moistened with
thin neutral detergent. Wipe clean with a damp
cloth. Be sure to wipe detergent completely and
wipe again with a dry cloth to dry it.
●When using alkaline electrolyzed water to remove
stains, spray directly on the stain and brush with
a soft brush taking ca re not to damage the cloth.
Then, wipe the moisture and stain to remove and
wait for the cloth to dry.
●Remove stains as quickly as possible.
●Avoid causing a circular stain, remove not only the
stain but also wipe off thoroughly around the stain.
●If you use a cleaning agent, make sure to confirm
that discoloration or other phenomena will not
occur by applying a small amount of the agent to
an unnoticeable portion in advance.
●Dirt may not be removed depending on the condition.
●
Wipe with a dry, soft cloth.
● When it gets exceptionally dirty, wipe off the
dirt with a well wrung soft cloth moistened
with thin neutral detergent. Be sure to wipe off
detergent completely with a damp cloth and
wipe again with a dry cloth to dry it.
●
Remove stains as quickly as possible.
●
Dirt may not be removed depending on the condition.
●
Wipe with a well wrung soft cloth moistened.
●When it gets exceptionally dirty, wipe off the
dirt with a well wrung soft cloth moistened
with thin neutral detergent. Be sure to wipe off
detergent completely with a damp cloth and
wipe again with a dry cloth to dry it.
●
Remove stains as quickly as possible.
●
Dirt may not be removed depending on the condition.
Panel (surface materials)
[Polyester or polyester/cotton]
Wall light cover, tabletop
bracket, etc. [Steel]
Tabletop (surface material) [HPL]
We recommend using a non-caster chair for Tetra and Penta..
Since the inside of each booth is compact, moving a caster chair may cause the
panels to be hit to be damaged, get dirty, or broken.
Caution
Power accessory
Wall light
A power unit can be attached underneath the tabletop at your preferred location.
(Screw-fixed to tabletop bottom side)
The optional wall lighting is soft enough to be easy on your eyes. while still aiding work.
The wall light is available with downlight only or with borth uplighitand downlighit.
Electrical specifications
Voltage rating: 125V
Rating capacity: 15A
Rated frequency: 60Hz
＊
UL listed for upholding strict safety standards.
Light specifications
Power consumption: 5.0W(Stand alone), 9.4W(Daisy-chained)
Color temperature: 3500K
Color rendering index: 85
Switch: Capacitive touch sensor (Master control for Daisy-chained kit)
Brightness adjustability: 100% - 15% continuous; w/last state memory
Automatic turn off: After 12 hours (
±
15 mins)
＊
ETL listed for upholding strict safety standards.
Electrical specifications
Dual USB-A: (2)10W USB-A ports
USB A+C: (1)10W USB-A, (1)15W USB-C
36W-power supply
Voltage rating: 125V
Rating capacity: 15A
Rated frequency: 60Hz
＊
UL listed for upholding strict safety standards.
Tri/Tetra Penta