6
7
10
8
9
❷
Place the movable shelf plate (large) on .
* The movable shelf plate (large) can also be installed to the upper unit.
Installation of movable shelf plate (large)
❶
Screw the shelf plate receiving dowels of into the posi-
tions of the desired dowel holes remaining on the upper
unit and lower unit to install. (4 locations)
c
Movable shelf plate (large)
Installation of movable
divider
❶
Insert the movable divider obliquely into the long round notch
in the rear panel as shown in the diagram.
❷
When moving the movable divider laterally, raise the front
slightly and then move laterally.
Movable divider
Raise the front slightly and
then move laterally
Installation of hooks
❶
Install the hook hanger of at either the right or
left position shown in the diagram with the con-
necting bolts of and connecting nuts of .
At this time, pass the S-shape hook of through
the hook hanger of in advance.
❷
Install the T-shape hook of to the side panel
with the connecting bolts of and connecting
nuts of . (4 locations)
g
h
f
f
e
d
f
e
d
f
e
d
i
To Use Safely
This indicates that improper handling due to disregard of this warning may result in injury or
damage to property.
Fully read the instruction manual before assembly, securely tighten the bolts
with a screwdriver, and use all of the assembly parts without leaving any
parts unused to assemble correctly.
When assembling, do not use an electric screwdriver. When any force more
than necessary is applied, the product may be broken or the bolt may not be
removed.
After assembling, fully tighten the product on a flat
surface, and make sure that each part is securely
installed.
There may be some parts and members which are not
used depending on the assembling pattern. Store them in
a safe place as these parts will always be necessary
when re-combining. Purchase parts separately when they
are lost.
Immediately after purchase, this product may emit
adhesive or paint odors. In such a case, sufficiently
ventilate and aerate. Periodically allow for ventilation.
When installing and moving this product, make sure two
persons carry the product without dragging it.
Dragging the product may result in damage to floors.
When the product is installed in a high humidity location, mold, etc., may grow.
Periodically allow for ventilation.
CAUTION
CAUTION
CAUTION
Cautions for assembly
Do not handle this product roughly or use for any other purpose than speci-
fied. Never apply body weight to any point on the product, or ride on it. It
may result in turnover or breakage, and is extremely dangerous.
Cautions for handling
Select a horizontal and stable location for installation. Use in a location
where the floor is inclined or unstable may result in turnover or an accident,
and is dangerous.
Avoid using this product in a location subject to direct sunlight, high
temperatures or high humidity or in a location subject to direct heat and
wind from a heating stove or air conditioner. It may result in alteration,
deformation or discoloration.
Do not place any hot object directly on the product.
It may result in alteration, deformation or discoloration.
Do not rub the product with hard material, and do not
write with a writing instrument such as a ball-point
pen with a hard tip without using a desk mat.
It may result in deformation or flaws.
Periodically inspect for looseness of the bolts and
connecting parts of the members, and securely
re-tighten them when there is any looseness.
Use while there is looseness may result in risks of
deformation, breakage and turnover.
Do not allow the product to become wet and remain wet and do not leave a
wet cloth on the product. It may result in deformation, cracks, swelling,
stains or corrosion of the surface material. When the surface becomes wet,
immediately wipe so that no moisture is left.
Do not attach any seals or cellophane tape, etc., to the product.
It may result in removal of the surface material.
Cautions for installation
To ensure long-term use
Make sure to wipe with a dry and soft cloth along the wood grain. Use with
a wet cloth may result in cracks and swelling. When the product is very
dirty, moisten a soft cloth with a diluted neutral agent (dishwashing soap),
and tightly squeeze it to wipe away dirt completely. And then, wipe with a
soft dry cloth so that no soapy residue remains. When a large amount of
moisture remains, deformation and discoloration may result.
Do not use alcohol-based or thinner-based
solvent/chemical waste cloth or commercial cleaner
since it will damage the surface. It may result in
discoloration, etc.
About care
Make sure to only place an object on the product within the maximum loading mass. Placing an object on
the product heavier than the maximum loading mass may result in turnover or breakage, and is
extremely dangerous.
Fixed shelf withstand load 20kg
(Uniformly distributed mass)
* Uniformly distributed mass means placing a mass uniformly on the desktop and shelf plate.
Diluted
solvent
Alcohol-based
solvent
Neutral a
gent
(dishwashing soa
p)
Memo
Seal
Assembly
Instruction
Manual