
49
EN
CLEANING AND CARE
•
Re-insert the condenser. Fix the locking levers. Close the condenser door until it
locks into position.
Note:
Do not use sharp tools for cleaning the condenser.
TROUBLESHOOTING
The following circumstances do not constitute problems. Do not contact the service
centre until the problem has been confi rmed.
Problem
Cause
Solution
Tumble dryer
fails to operate.
• Poor connection to the power
supply.
• Check connection to the power
supply.
• Power failure.
• Check the power supply.
• No drying program is set.
• Set a drying program
• Device has not been switched
on.
• Switch on the device.
• The water collection tank is
full.
• Empty the water collection
tank.
• The tumble dryer door is not
properly closed.
• Close the tumble dryer door
properly.
Tumble dryer
fails to oper ate.
Indicator
End
lights up.
• The laundry has reached the
condition defi ned by the
program setting.
• Make sure the program is set
correctly.
• There is no laundry in the
drum.
• Check if there is laundry in the
drum.
Drying time is
too long and
the results are
not satisfactory.
• The program setting is not
correct.
• Check if your program setting
is appropriate.
• The fi lters have not been
cleaned.
• Clean the fi lters.
• The condenser is blocked.
• Clean the condenser.
• The tumble dryer is
overloaded.
• Reduce the amount of laundry
in the drum.
OTD 202_A5_130723 (1.5).indb 49
OTD 202_A5_130723 (1.5).indb 49
22/7/13 4:13 PM
22/7/13 4:13 PM