100
EN
Size - A5
Size - A5
Signal DVB-S2
Satellite
Add
satellites:
Press
RED
(GOTO) to add a new satellite, in which you must input an
unique longitude, and edit the satellite’s name with soft keyboard.
Edit
satellites:
Press
GREEN
(SLOW) to edit the selected satellite.
Delete
satellite:
Press
YELLOW
(REPEAT) to delete the selected satellite. Press
OK
to
confirm. Press
to select a satellite, whose settings will be shown at
right side:
LNB Type:
Press or
OK
to show the list of LNB Type. You also
can enter frequency by selecting User Single or User
Dual.
LNB Power:
Press to set the LNB power.
22KHz:
Press to select ON, OFF or AUTO, which is set with
auto when LNB Type is dual local oscillator.
Toneburst:
Enable or Disable the toneburst switcher.
DiSEqC1.0:
Select the right port up to 4 for the right LNB.
DiSEqC1.1:
Select the right port up to 16 for the right LNB.
Motor:
Press to select DiSEqC1.2 or DiSEqC1.3. Then Press
OK
to show the
menu to set position:
Move Auto:
Press to start to move West/East. It will be stopped
automatically when the signal is locked.
Move
Continue:
Press to start to move West/East. It will keep
moving until you stop it.
Move Step:
Press to move just a step.
Store
Position:
Store current motor position.
Goto
Position:
Press to go to the position stored.
Goto
Reference:
Rest all the positions.
Goto X:
Go to the position calculated from the local and satellite
positions.
TV_A5_23.6_DE_EL_EN_ES_130306.indb 100
6/3/13 4:25 PM