background image

English

   - 42 -

To change channel:

 Press the middle of the button  

in, the information banner will appear on the screen. 

Scroll through the stored channels by pushing the 

button up or down.

To change source:

 Press the middle of the button in 

twice(for the second time in total), the source list will 

appear on the screen. Scroll through the available 

sources by pushing the button up or down.

To turn the TV off: 

Press the middle of the button in 

and hold it down for a few seconds, the TV will turn 

into standby mode.

To turn on the TV:

 Press the middle of the button in, 

the TV will turn on.

Notes: 

•  If you turn the TV off, this circle starts again beginning 

with the volume setting.

•  Main menu OSD cannot be displayed via control 

buttons.

Operation with the Remote Control

Press 

Menu

 button on your remote control to display 

main menu screen. Use the directional buttons to select 

a menu tab and press 

OK

 to enter. Use the directional 

buttons again to select or set an item. Press 

Return/

Back 

button or 

Menu

 button to quit a menu screen.

Input Selection

Once you have connected external systems to your 

TV, you can switch to different input sources. Press 

Source

 button on your remote control consecutively 

to select the different sources.

Changing Channels and Volume

You can change the channel and adjust the volume 

by using the 

/-

 and 

Programme

 

+/-

 buttons 

on the remote. 

Inserting the Batteries into the Remote

Remove the screw that secure the battery compartment 

cover on the back side of the remote control first. Lift 

the cover gently. Insert two 

AAA

 batteries. Make sure 

the (+) and (-) signs match (observe correct polarity). 

Place the cover back on. Then screw the cover back 

on again.

Connect Power 

IMPORTANT

: The TV set is designed to operate on 

220-240V AC, 50 Hz

 socket. After unpacking, allow the 

TV set to reach the ambient room temperature before 

you connect the set to the mains. Plug the power cable 

to the mains socket outlet.

Antenna Connection

Connect the aerial or cable TV plug to the AERIAL 

INPUT (ANT) socket located on the back of the TV.

Содержание OLE 20640H-DB





















Отзывы: