Metcal is an OK International Brand • Copyright © All Rights Reserved • BVX-200 Rev 01-15-04
7
2.0 Description
2.1 Operating Elements and Construction
2.2 Theory of Operation
The efficient removal of hazardous fumes at your workplace is a two-step
process: fume capture and filtration. The filter unit is supplied with a set of
filters already installed.
To capture the fumes, Metcal recommends use of optional exhaust arms and
accessories (purchased separately). The exhaust arms need to be set up
properly (instruction supplied with exhaust arm) and the nozzle positioned in a
way to optimize the fume capture.
Air extracted from your work area will be purified when passing through
the
filters inside the
unit and then is returned into your work area.
Contact your local Metcal representative if there are any questions regarding
the proper selection of filters for your application.
Power
Supply
On/Off Switch with
Red ON Indication
Filter Cover Latch (front
and back).
Pull from bottom to open.
ESD Safe
Air Inlets:
63mm OD
50mm ID
