•••• www.ojedausa.com • [email protected] • Pg. 5 ••••
ELECTRICAL REQUIREMENTS
The power cord of this appliance is equipped with a 3-prong
(grounding) plug which mates with a standard 3-prong (grounding)
wall outlet to minimize the possibility of electric shock hazard from
this appliance.
The use of extension cords is not permitted and will void the
warranty.
Before connecting your equipment, check that the electrical data on
the data plate match your electrical output. If voltage varies by 10
percent or more, freezer performance may be affected. Operating the
freezer with insufficient power can damage the compressor. Such
damage is not covered under the warranty. If you suspect voltage is
high or low, consult your power company for testing.
To prevent the freezer from being turned off accidentally, do not plug unit into an outlet controlled by a
wall switch or pull cord.
Do not pinch, knot, or bend the power cord in any manner.
IMPORTANT
NOTICE:
P
LUG THE EQUIPMENT INDEPENDENTLY TO A LOAD CENTER WITH AN
APPROPRIATE CIRCUIT BREAKER ACCORDING TO THE NAMEPLATE AMPS
.
PRODUCT LOADING
The CT series of units are not intended to be a pull down freezer and as such the product must be loaded
at their intended merchandising temperature.
Before loading products, allow the equipment to operate empty for at least four hours.
SHELF SPECIFICATIONS
The shelves have been designed to withstand the rigors of normal use. Avoid product overloading to
prevent deforming the shelves.