OJ Electronics MTD3, Инструкция по эксплуатации

Страница: 5 / 68

© 2020 OJ Electronics A/S © 2020 OJ Electronics A/S 5
MTD3 Instructions
1. TECHNICAL SPECIFICATIONS
Control pollution degree ....................................................................................2
Software class .................................................................................................. A
Built-in circuit breaker .....................................................................2-pole, 16 A
Enclosure rating .......................................................................................... IP 21
Overvoltage category .......................................................................................III
Rated impulse voltage ................................................................................. 4 kV
Ball pressure temperature (TB) ..................................................................125°C
Voltage .......................................................................... 230 V AC ± 10%, 50 Hz
Max. prefuse ................................................................................................ 16 A
Output ................................................................................................ Max. 16 A
Output relay ............................................................. Make contact - SPST - NO
Output applications ................................Resistive load 16 A Inductive load 1 A
Terminal wire size ..........................≤ 13 A - 1.5 mm
2
, > 13 A to 16 A - 2.5 mm
2
,
solid core wire
Method of mounting ...................................................................Flush mounting
Dimensions ............................................................................... 84 mm x 84 mm
Build-in depth .......................................................................................... 20 mm
Sensor type ..........................................................................NTC 12 kΩ @ 25°C
Max. sensor extension ............................................................................... 10 m
Temperature range ..............................................................................+0/+40°C
Control principle .................................................................................... ON/OFF
Purpose of control ............................Thermostat for electric underfloor heating
Design of control ................................................................................... PWM/PI
Type of action ................................................................................................ 1.B
Standby power ....................................................................................... < 0.5 W
Display .................................................................................................. Segment