PAGE 8
© 2018 OJ Electronics A/S
OJ Winterline
®
3 1 Mounting the Controller
1 Open the controller/ unscrew the clear lid
2 Use the drilling template included in the Quick Guide to mark the mounting
holes
3 Mount the controller on a straight wall (screws not included) Use 6 screws
maximum 4 mm / size 7
4 Open the controller and remove the inner cover to access the terminals
5 Remove the plugs in the cable fittings used
6 Mount the cables through the cable fittings and tighten the fittings
Important! Use the correct cable sizes, and make sure the cable fittings are tight
around the cables to maintain the proper protection level (IP66/NEMA4x)
BR1035A01 ©
2017 OJ Electronics
A/S
BR1035A02 ©
2017 OJ Electronics
A/S
BR1035A01
BR1035A02
>
<
Contents
