© 2017 OJ Electronics A/S
5
INSTRUCTIONS OJ DRHX PC-Tool
3. Functions
3.1
Access level overview
Access level 0: User
• Setup: Set Modbus parameters for the connected OJ-DRHX
• Operate: Set operation parameters for the connected OJ-DRHX
• Log: View log data for the connected OJ-DRHX
• Info: View drive software version no., type of connected OJ-DRHX and alarm log
• About: View OJ DRHX PC-Tool version no. and contact information
Access level 1: Service
• Configure: Setup and change basic settings
• Firmware & Config:
Update firmware and config files
3.2
Setup (access level 0)
Set communication parameters
between PC and drive
• Select COM port
• Set Modbus ID (1-248) or search
for Modbus ID (default ID: 79)
• Select baud rate (9600, 19200,
38400, 57600, 115200)
• Select parity bit (None, Odd, Even)
• Select stop bits (1, 2)
Fig. 2
