5
© 2012 OJ Electronics A/S
Type UCG/UDG
English
Factory setting: 24 hour clock
SETTINGS
TIME
Setting Day
I want to change the day of the week.
To do so, you must:
1
With
Active Display
(backlight on) press
OK
to activate the menu.
2
Press the
Up
or
Down
buttons until the
SETTINGS
option flashes.
3
Press the
OK
button.
4
Press the
Up
or
Down
buttons until the
DAY
option flashes.
The currently selected day of the week will appear in the lower part of
the display.
5
Press the
OK
button.
6
Press the
Up
or
Down
buttons until the required day of the week
flashes.
7
Press the
OK
button.
8
Follow the
Exit Menu
procedure to exit the menu.
Please note:
Usually, the electrician who installed the thermostat will have
set the correct time and day of the week.
Factory setting: MON
SETTINGS
DAY
MON
FRI
TUE
SAT
WED
SUN
THU
Read Out
I want to know the amount of time (in percent) that the heating
has been turned on within a certain period.
To do so, you must:
1
With
Active Display
(backlight on) press
OK
to activate the menu.
2
Press the
Up
or
Down
buttons until the
SETTINGS
option flashes.
3
Press the
OK
button.
4
Press the
Up
or
Down
buttons until the
READOUT
option flashes.
5
Press the
OK
button.
6
Press the
Up
or
Down
buttons to the select the period of interest:
2 DAYS
,
30 DAYS
or
365 DAYS.
The percentage of time that the
heating has been turned on will then be indicated in the upper part of
the display.
The Readout submenu also contains information about the Software
version and the type of control (Room, Floor, Regulator or Room limit)
selected for the Application. (See Application for more information).
SETTINGS
READOUT
2 DAYS
30 DAYS
365 DAYS
SOFTWARE
APPLICATION
EXIT
Offset Temperature
I want to adjust the difference in temperature between the ther-
mostat and my room thermometer.
To do so, you must:
1
With
Active Display
(backlight on) press
OK
to activate the menu.
2
Press the
Up
or
Down
buttons until the
SETTINGS
option flashes.
3
Press the
OK
button.
4
Press the
Up
or
Down
buttons until the
OFFSET TEMP
option flashes.
5
Press the
OK
button.
6
Press the
Up
or
Down
buttons to set the offset temperature (in steps
of 0.1°).
7
Press the
OK
button.
8
Follow the
Exit Menu
procedure to exit the menu.
Offset is used to compensate for any difference between the thermostat
and the actual room temperature. It is possible to adjust the offset by up
to +/- 10 °C or +/- 18 °F.
If, for example, the thermostat shows 1° too much, the offset should be
set to 1°. The temperature will then be set 1° lower.
SETTINGS
OFFSET TEMP
Application
I want to select the type of temperature control.
To do so, you must:
1
With
Active Display
(backlight on) press
OK
to activate the menu.
2
Press the
Up
or
Down
buttons until the
SETTINGS
option flashes.
3
Press the
OK
button.
4
Press the
Up
or
Down
buttons until the
APPLICATION
option flashes.
5
Press the
OK
button.
