Oilon Lampoassa RE 28-48, Инструкция по установке и эксплуатации, Страница: 25 / 78

5 Operation
5.1 Heat pump user interface
Navigate the menus and settings by
turning the control knob.
Select a menu or setting by pushing in the
control knob.
Move to the previous menu by using the
arrow or text field at the bottom of the
screen.
1) Control knob
2) Display
3) Navigation bar
4) Status bar
5) Work area
Status bar symbols
Active alarm
Special operations are active (e.g., outdoor temperature simulation or emergency operation), or the
maximum number of error notifications permitted by the settings has been reached.
The heating circuit operating mode has been changed and, as a result, scheduled automatic
operation is disabled. This icon is shown if the operating mode is changed from Automatic to
another mode, such as Comfort.
User level
No symbol: end-user (no password)
1: commissioning (no password)
2: expert (password: 00017)
3: OEM operation (password 24358)
The heat pump’s compressor is on.
Event message
Navigation bar
Start page
● key temperature values
● switching heating circuits
ON
(to automatic mode) or
OFF
(to frost protection mode)
Heating circuits
● operating mode
● room temperature setpoint for Comfort mode
● time programs
Domestic hot water
● switching domestic hot water heating on and off
● recharging DHW to its setpoint (before the switching limit is reached)
● Domestic hot water time programs
Status information
● temperatures
● operating modes
● fault information and resetting the heat pump under fault conditions
M8009 2147EN 23 (74)