background image

SonarMite BTx/SPx v5.02 © 2016 Lymtech 

 

Page 2 

 

INTRODUCTION 

 
The  SonarMite  Echo  Sounder  was  the  result  of  nearly  two  years  research  and 
development  to  further  extend  the  boundaries  of  shallow  water  hydrographic 
surveying  equipment.  The introduction by Ohmex of the SonarMite, the worlds  first 
truly portable echo sounder system, has been a hard act to follow and it remains the 
portable  instrument  of  choice  in  many  survey  companies  around  the  world.  The 
release  of  the  SonarMite  BTX/SPX  instrument  marks  the  next  stage  introducing  a 
series  of  equipment  designed  around  the    WinSTRUMENT  concept  using  the  latest 
portable computers integrated with new measurement technologies. 

 

Throughout  the  Hydrographic  world  the  term  'Black  Box'  has  become  a  euphemism 
for a device that has  a minimal  user interface and normally requires connection to  a 
PC  to  be  of  any  use  !  In  most  cases  these  boxes  are  a  cut  down  version  of  a  more 
conventional  instrument  without  all  the  features  of  the  full  system.  The  SonarMite 
extends this idea of a rugged design and minimalist interface to produce a 'Blue Box' 
system  where  the  user  interface  is  provided  by  integrated  software  running  on  a 
portable  computer  connected  via  a  Bluetooth  link.  The  use  of  wireless  technology 
enables the instrument to be waterproof and used in a hostile environment while the 
more sensitive computer features can be located in a more user friendly environment 
up to 50m away from the instrument. 

 

 

Typical SonarMite equipment 

 

The  SonarMite  BTX/SPX  instrument  uses  the  same  'Smart'  integrated  transducer 
technology  used  in  previous  systems,  in  addition  to  highly  reliable  bottom  tracking 
algorithms  using  DSP  techniques  the  system  also  outputs  a  quality  value  associated 
with  every  depth  measurement  made.  The  popular  SonarW7  software  has  been 
updated to the latest Windows versions. Software for the 'front end' of the SonarMite 
is  available  to  run  on  a  wide  range  of  devices  from  Pocket  PCs  through  to  the  full 
range of desktop systems running the Windows operating system. 

Содержание SONARMITE



























Отзывы: