OHM DSP-A3, Руководство пользователя, Страница: 9 / 19

DSP-A3
DSP-A3
Operating Mode
1. Stereo Operation
Two fully independent amplifier channels for (normal operating mode)
Select preset “ Stereo mode” to enable normal stereo operation (see “Presets” on page 8)
2. Bridge Operation Mono
The input signal is taken from the channel A input.
Connect the + of your loudspeaker to pin 1+ of channel A output, and the - of your loudspeaker
to pin 2+ of channel A output.
Select preset “ Bridge Mono mode” to enable Bridge operation (see “Presets” on page 8)
10