11/12
Stroke adjustment
Caution!
✋
Never use more stroke than what is specified for your
bike otherwise there is a risk that you damage the frame
or the shock absorber.
Warning!
⚠
Make sure that all pressure is released from the air
spring before starting to work on it.
Warning!
⚠
Never install more spacers than the maximum specified
amount.
1
Release the air pressure, check your settings
soitiseasiertofindcorrectsag.
2
Remove the air sleeve using a rubber strap
wrenchorspecifictool.
3
Pull up the air sleeve.
4
Pull up the spacer holder.
5
Snap on the stroke reducer(s) to the shaft
under the spacer holder. Each spacer reduces
the stroke with 2.5 mm. Use 1, 2 or 3 spacers
to reduce the stroke.
6
Make sure the spacer holder encloses
the stroke reducers. Push down the shim,
O-ring and the spacer holder to the end eye.
Assemble the air sleeve and set pressure.
Delivered with
stroke (mm)
(0 stroke
reducers)
Maximum
number of
stroke reducers
(Stroke lengths)
MTBM 2310
MTBM 2311
40
1 reducer
(37.5)
MTBM 2312
MTBM 2313
50
1 reducer
(47.5)
MTBM 2320
MTBM 2321
MTBM 2324
MTBM 2325
45
3 reducers
(37.5)
MTBM 2322
MTBM 2323
MTBM 2326
MTBM 2327
55
3 reducers
(47.5)
1
2
3
4/5
6
Spacer holder
encloses the
stroke reducers
