Öhlins RXF38 m.2, Руководство по ремонту, Страница: 7 / 10

7
RXF38 M.2/M.1 50-HOUR SERVICE
18 . Use fluids in spring and damper fork leg according to
table below. It is important to not to overfill as it will affect fork
performance.
Damper fork leg Spring fork leg
Model Fork part no. Oil Volume Oil Volume
RXF38 m.2 FGxxx 381x 22xx Damper fluid 15 ml Fork lubrication fluid 15 ml
RXF38 m.1 FGxxx 381x 21xx Fork lubrication fluid 10 ml Fork lubrication fluid 10 ml
See appendix A to detemine the part no. of the fork.
19. Reinstall the nuts. Use a torque wrench with a 14 mm hex sock -
et and tighten to 10 Nm.
20. Reinstall the rebound adjuster knob and screw. Use a 14 mm
wrench to hold the knob steady. With a 2 mm hex wrench tighten the
screw and knob.
21. Adjust the rebound setting according to values recorded at
step 3.
22. Adjust the LSC and HSC setting according to values recorded at
step 3.
Only for RXF38 m.1!
23. Reinstall the golden bash caps. Tighten by hand.
24. Install the fork on the bike according to instructions in the
Owner’s manual.
Warning! ⚠
If the bottom crown is mounted too low the crown will make contact with the tire
when bottoming. Always remove air spring pressure and compress the fork fully
after mounting to ensure proper tire clearance. Please consult the Owner’s manual
for further details.
See Owner’s Manual/Mounting Instructions for more information.
25. Go out and enjoy your ride!
18
19
20
21
23