![background image](http://html2.mh-extra.com/html/ohlins/bm335/bm335_mounting-instructions_3067215002.webp)
Before you start
WARNING!
Installing a shock absorber, that is not
approved by the vehicle manufacturer,
may affect the stability of your vehicle.
Öhlins Racing AB cannot be held
responsible for any personal injury or
damage whatsoever that may occur
after fitting the shock absorber. Contact
an Öhlins dealer or other qualified
person for advice.
Öhlins Racing AB can not be held responsi-
ble for any damage whatsoever to shock
absorber or vehicle, or injury to persons, if
the instructions for fitting and maintenance
are not followed exactly. Similarly, the
warranty will become null and void if the
instructions are not adhered to.
WARNING!
Please study and make certain that you
fully understand all the mounting instruc-
tions and the owner´s manuals before
handling this shock absorber kit. If you
have any questions regarding proper
installation procedures, contact an
Öhlins dealer or other qualified person.
WARNING!
The vehicle service manual must be
referred to when installing the Öhlins
shock absorber.
NOTE!
Öhlins products are subject to continual
improvement and development. Con-
sequently, although these instructions
include the most up-to-date information
available at the time of printing, there
may be minor differences between your
suspension and this manual. Please
consult your Öhlins dealer if you have
any questions with regard to the con-
tents of the manual.
Safety signals
Important information concerning safety is
distinguished in this manual by the
following notations
The Safety alert symbol means:
Caution! Your safety is involved.
WARNING!
Failure to follow warning instructions
could result in
severe or fatal injury
to
anyone working with, inspecting or using
the suspension, or to bystanders.
CAUTION!
Caution indicates that special precautions
must be taken to avoid damage to the
suspension.
NOTE!
This indicates information that is of
importance with regard to procedures
Kit contents
Before installing the shock absorber,
please check the contents of the kit, listed
on the front page of this instruction. If any-
thing is missing, contact your Öhlins
dealer.
NOTE!
During storage and transportation, es-
pecially at high ambient temperature, the
oil and grease used for assembling may
run out inside the packing and damage
the expanded polystyrene packing ma-
terial. This is not unusual and is in no
way detrimental to the shock absorber.
© Öhlins Racing AB.
All rights reserved.
Any reprinting or unauthorized use
without the written permission of
Öhlins Racing AB is prohibited.
Printed in Sweden.
WARNING!
1. It´s advisable to have an Öhlins
dealer or other qualified person to fit
your shock absorber.
2. Instructions in the vehicle service
manual are to be followed when
changing the shock absorber.
3. When working on a lifted vehicle it
must be securely supported to prevent
it from falling.
NOTE!
Make sure that all bolts are tightened
to the correct torque and that nothing
fouls or restricts movement of the shock
absorber when the suspension is being
fully compressed or extended.
WARNING!
Certain modifications may be neces-
sary when installing the Öhlins shock
absorber/suspension. It is essential that
the mounting instructions are carefully
followed.
5
Remove shock downwards.
6
Mounting of the Öhlin shock absorber:
Start by moving “rubber washer” from
original shock to Öhlin shock. Fit the shock
in upper “bracket” and mount the nut. Lift
front wheel and mount the lower bolt.
Make sure that all bolts are tightened.
7
Restore fueltank, side covers and seat.
Mounting Instructions
1
Put the motorcycle on the center stand
and remove the seat.
2
Remove side covers on the windshield.
3
Loosen fueltank and move it rearwards,
this to get access to upper shock
mounting.
4
Remove upper nut and lower shock
absorber bolt.