1
How to install
Warning!
It is advisable to have an Öhlins dealer install the
shock absorber.
When installing, consult your Vehicle Service
Manual.
1
Put the motorcycle on a workstand so that
the rear wheel barely touches the ground.
Warning!
Make sure the vehicle is securely supported so
that it will not tip.
2
Remove the right side exhaust guard.
3
Remove the upper screw of the link (A).
Remove the front screw (B), and loosen the
rear screw of the link arm (C).
Caution!
The brake hose must not be stretched. It can
be damaged. Support the swing arm once the
lower screw of the shock absorber is removed.
4
Push the link and the link arm backwards so
that you can remove the rear screw of the link
arm (C).
5
Remove the upper screw of the original shock
absorber. Remove the shock absorber and
the link, remove the whole unit above the rear
wheel.
2
C
3
View from the left
A
B
4
Link
arm