Öhlins Racing AB
Box 722
SE-194 27 Upplands Väsby,
Sweden Phone +46 8 590 025 00
fax +46 8 590 025 80
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
To find the latest information
contact an Öhlins distributor.
Please contact Öhlins if you have
any questions regarding the
contents in this document.
Part no. MI_FSK105_EN_0
Issued 2015-07-01
MOUNTING INSTRUCTIONS
Congratulations!
With this purchase you have made a clear
statement. This high performance Front Fork
spring kit from Öhlins is nothing but pure racing
breed which means that you have taken one
more step to eliminate luck on your motorcycle.
The balance between your Front Fork and
rear suspension will sharpen up and the
performance of your Front Fork will improve.
Almost 40 years of racing experience is now a
crucial part of your riding experience.
Recommended oil
We recommended to use Öhlins high performance
Front Fork fluid 01316-01.
Recommended oil Level
140mm.
How to install
1.Put the motorcycle on the work stand so that
the front wheel barely touch the ground. Make
sure the motorcycle is in a stable position.
2.Release the fork tube from the top triple clamp.
3.Remove the original Top cap (1), Pre-load tube
(2), and Spring (3)
4.Insert the Öhlins spring (8), Spring washer (5),
Öhlins Pre-load tube (7)
5.Install the Öhlins Top cap assembly. Tighten
the top cap at torque value ̴ 10N/mm.
Note!
The measurement of oil level is taken from the top of the
inner tube (5) to the oil surface.
> The fork leg need to be in vertical position
> The fork need to be fully compressed
> The fork must be without the spring and the preload
tube
Note!
Öhlins FSK 105 gives the possibility to adjust the spring
preload -5/+15mm from standard preload (13mm).
> Every complete turn equal 1mm adjustment
Note!
Öhlins FSK 105 spring 68008-75 rate is 7.5N/mm
