background image

          Ohenry  Productions  Inc.  3859  Chappel  Hill  Rd.  Waco,  TX.  76705                                                                                                                                            

                  (254)714-1103 Office (254)714-1117 Fax

                                      “OHENRY WEST COAST FRAME TENT” ASSEMBLY INSTUCTIONS 

                                                                               10’ wide – 20’ wide

                                                                       

    All tubing is labeled for easy Identification.

                                                           Please verify the parts with the chart provided before you begin assembly.

                    Assembly Steps:

 1. Lay out the Spreader pipes and Corner Fittings in a square or rectangle (refer to previous page). Lay out Hip Rafters and Rafters 

and Side T Joints.  Place Center Crown(s) in the center of the tent.

2. Start assembling the frame by inserting and pinning the Hip Rafters into the Center Crown(s). If assembling a rectangular frame 

insert and pin the appropriate Spreader into the Center Crown and continue to the next Ridge Top T or Center Crown. Insert and pin 

Rafters into the Crowns and Ridge Top T’s. Insert and pin all Corner Fittings and Side T Joints to the bottom of the Hip Rafters and 

Rafters.

3. Start at one corner of the frame and insert and pin the Corner Fitting to the Spreader. Continue in one direction around the frame 

inserting and pinning each fitting to the Spreaders.

Отзывы: