R.6 Massage Chair
Assembly Instructions
9. Remove the right arm from box 2 of
2. Then, align the arm’s connection
points (upper hook, and the two bolt
holes on the base/bracket of the arm)
so its securely sitting on the body of
the chair.
10. Using the provided T-wrench, firmly secure the the
arm to the chair by carefully installing the two 4mm cap
head screws at the arm bracket connection located near
the seat of the chair.
11. Connect the one electrical connector
and the one airline from the arm to the base
of the chair. Ensure that the electrical
connector’s tab faces toward the back of
the chair and is fully snapped in, and that
the airline is pushed on as far as it will go.
12. Repeat steps 9-11 to install the left arm.
