EN-4
Valor
TM
7000 Series
The colored LED indicators on the left side of the control panel are used in Check mode and will light up according to the
following rules:
(Red) Loads > Upper limit
(Green) Loads ≥ Lower limit and ≤ Upper limit
(Yellow) Loads < Lower limit
3.2 Menu Structure
Menu:
C.A.L
S.E.t.U.P
r.E.A.d
U.n.i.t
Menu
Items:
Zero2
1
Span1
Span2
1
Lin1
Lin2
1
GEO
End
Reset
D.Scale
Cap2
1
Grad2
1
Pwr. Un
Zero
A.Opt
A.Tare
Bp.Opt
Bp.Sig
Bp.Key
Accum
End
Reset
Stable
Filter
AZT
Light
A.Off
End
Reset
kg
g
lb
oz
lb:oz
End
P.r.i.n.t.1
C.O.M.1
L.O.C.k
E.n.d
Menu
Items:
Reset
Stable
A.Print
Contnt
Layout
Data.Tr
End
Reset
Baud
Parity
Stop
Handsh
Alt.Cm
End
L.Cal
L.Setup
L.Read
L.Unit
L.Print
L.COM
End
3.3 Using the Instrument
Weighing Application
1.
If required, place an empty container on the pan and press
Tare
.
2.
Add sample to the pan or container. The display shows the weight of the sample
4. MAINTENANCE
.
4.1 Cleaning
WARNING:
Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention:
Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.
4.2 Troubleshooting
For technical issues contact an Authorized Ohaus Service Agent. Please visit our website
www.ohaus.com
to locate the
Ohaus office nearest you.
