STARTER 2200 Bench pH Meter
EN-7
2.2
Installing the built-in electrode arm
Install the built-in electrode arm on the left or right sight of the STARTER 2200 meter.
Remove the rubber hole cover from the meter
，
insert the metal stick into the hole and screw
to fasten it.
Install the upper electrode arm upon the metal stick from above; adjust it to a desired height.
2.3
Installing power adapter
Choose the proper adapter clip, insert into the power adapter slot.
Use of other power adapters can damage the meter and void the warranty.
A surge protector or uninterrupted power supply (UPS) is also recommended.
