OHAUS SD Series, Руководство по обслуживанию

Страница: 23 / 37

CHAPTER 3 MAINTENANCE PROCEDURES
3.2.2 Battery Replacement
1. To replace the Type C (LR14)
batteries, press the inset latch lever
in the middle of the Bottom
Housing.
2. Note the proper direction for
inserting new batteries, printed on
the inside of the Battery
Compartment door.
3. After placing the batteries as
indicated, close the Battery
Compartment door.
Figure 3-2. Open Battery Compartment door
by pressing the inset latch lever.
3.2.3 Function Label Replacement
1. Unplug the Indicator from the AC Adapter.
2. Lift the Function Label off from the Top Housing. Remove the old Display Window.
The Function Label is held in place with a strong adhesive. Clean the Top Cover and
remove all traces of adhesive.
CAUTION
Be careful placing the Function Label into position as the adhesive will not allow
repositioning once attached to the cover.
3. Put the new Display Window in place.
4. Remove the protective backing from the back of the new Function Label, and
carefully position it on the Top Housing, starting at the bottom of the Housing.
Use a rolling motion to smooth the Function Label into position.
SD Series Scales Service Manual 3-3 Ohaus Corporation www.ohaus.com