background image

 

 

Scout SPX-SJX-SKX FAQ 

AppNotes.v20180726_ AG 

For any further questions, please e-mail us at [email protected], or call us at 973-377-9000 #2 or ext. 7852 from 8AM to 5PM EST 

 

 

 

 

 

 
 
 
 
 
 

How to Switch Between Units of Measure 

Long-press [PRINT 

Units

] to scroll through the enabled units of measure. 

If the desired unit of measure is not displayed, make sure it is enabled in the UNIT Menu (see previous 
section

How to turn on units of measure

). 

 

 

 

 

 

 

 

 

 

5.  The span value is displayed 

– place the specified 

calibration mass on the pan (in this example: 400g) 
 

Optionally, you can press [NO] at this time to toggle through 
other available span values. 

 

 

 

As the balance detects the correct calibration mass on the 
pan, --C-- flashes while the span value is stored  

 

 

 

DONE flashes when calibration is complete. 

 

 

The balance returns to the active weighing mode. 

 

 

Note: To abort calibration, press [EXIT] instead before the process is DONE (CAL-E will flash before returning to the active weighing 
mode; the original calibration data is retained).

 

1.  Press and hold [PRINT 

Unit

] to scroll through the enabled 

units of measure. 

 

 

 

In this example, the scale is scrolling through grams (g) and 
ounces (oz).  

 

 

 

2.  Release the button once the desired unit of measure is 

displayed.  
 
In this example, back to grams ("g"). 

 

 

. . . 

. . . 

Отзывы: