EN-20
SCOUT
®
SERIES BALANCES - STX
Step 2 of 3
– Weigh the Oiled Sample in Air.
Follow the screen instructions then press
Accept
to store the sample weight (oiled).
Step 3 of 3
– Weigh the Oiled Sample
Submerged in Liquid.
Follow the screen instructions then press
Accept
to store the oiled sample weight (submerged in
liquid).
Once the necessary weights have been
determined, the density of the sample is
displayed in
g/cm
3
(along with the weight in
air, un-oiled and oiled, and weight in water) on
the Application screen
The value stays on the display until
Start
is
touched.
Press
Start
to reset all the weight values and
restart the process.
4.6 Check Weighing
Check Weighing is used to compare the weight of a sample against target limits.
1. In the upper left portion of the home screen, select
Check Weighing
.
2. The default (or last) Check weigh limits are displayed.
3. Place objects on the pan.
4. The
Under/Accept/Over
status is shown in the progress bar area while the actual weight of
the item is shown on the main Display Line.
