Quick Start Guide
Scout
Pro
Balance
Ohaus Corporation www.ohaus.com
iii
Scout
Pro Balance
Quick Start Guide
OPERATION
Weighing
Start with the balance on.
1
(Rezero the display)
(Place sample on platform)
(Example 50g)
Taring a Container’s Weight
Taring zeros the container weight. With balance on, place an empty container on the platform.
(Container weight)
1
(Container weight tared)
(Place material in container)
(Material and container removed)
(50g sample)
To remove tare, press
ON/ZERO Off
again.
ADDITIONAL OPERATIONS
Use the Units Menu to activate
Parts Counting
or
Percent Weighing
.
(See back page.)
To enable
Display Hold
,
Totalize
and
Specific Gravity
, use the Setup/Mode submenu.
Parts Counting
has two modes:
(See Instruction Manual for more details.)
Normal:
balance determines quantity based on average weight of parts in original
reference quantity.
Enhanced:
additional parts can be added to the platform (
≤
the original number).
The additional reference quantity produces a more accurate average part weight.
Percent Weighing:
place a reference weight on the balance, then view other loads as a
percentage of the reference. The reference weight equals100%.
Display-Hold
mode captures and stores the highest stable value. When displayed, the stability
indicator blinks.
Note
: Units cannot be changed when in Display-Hold mode.
Totalize
allows storage of a series of weight measurements. Totalize mode has been initiated
when “
t
” and the current unit are displayed together. When totalized weight is shown, the “
t
”
indicator blinks.
Note
: Units cannot be changed when in Totalize mode.
The
Specific Gravity
mode allows calculating the specific gravity of a sample.
(SPEC.GR mode must be turned ON before removing platform and installing hook.)
