OHAUS Ranger R41MEB, Инструкция по эксплуатации

Страница: 8 / 39

Ranger
™ 4000 Series EN 6
Figure 3-4. Below view of Ranger 4000
3.2 Turning Scale On/Off
To turn the scale on, press and hold the On/Zero Off button for 1 second. The scale performs a
display test, momentarily displays the software version, and then enters the active weighing
mode.
To turn the scale off, press and hold the
On/Zero Off button until OFF is displayed.
3.3 Weigh Mode
This mode is the factory default setting.
1. If needed, press and hold Mode until [
wWeIGH
] (Weigh) is displayed.
2. If required, place an empty container on the pan and press Tare .
3. Add sample to the pan or container. The display shows the weight of the sample.
3.4 Percent Mode
This mode measures the weight of a sample as a percentage of a reference weight.
1. If required place an empty container on the pan and press Tare .
2. Press and hold Mode until [
Percnt
] is displayed. [
Clr.ref
] (clear reference) will then display.
If no reference weight exists, the scale will display [
Put.ref
], proceed to step 5.
3. Press No to use the stored reference weight and proceed to step 6.
Power Input
Weigh Below
Access
RS232 and
Option
Interface Port
(below cover)
Lock Switch
Battery
Chamber