OHAUS Ranger 4000 Count Series, Инструкция по эксплуатации

Страница: 2 / 4

2
nd
Scale Interface EN-1
INTRODUCTION
This Second Scale interface Kit is for use with the Ohaus product Ranger Count 3000. Through this
kit you can connect additional platform with Ranger Count 3000.
KIT CONTENTS

2 nd Scale PC Board

Pressure Button

Screws (4)

Instruction Manual
INTERFACE INSTALLATION
Install the Interface module on the underside of the balance as shown.
1 . Remove the red interface options cover. Break off the plastic blocker from the option cover.
2 . Install the Interface PCB. Push it through the pins and secure it with the 4 screws.
3 . Connect a cable.
4 . Place the cord in the groove and put the red interface option cover back on.
Pins
Groove
for cable
Screws