OHAUS MB120 Скачать руководство пользователя страница 12

Страница: 12 / 76

EN-6 MB120

  generate magnetic fields.
•  On an unlevel work surface.
•  In confined areas, allow sufficient

space around the instrument for ease

of operation and keep away from

radiating heat sources.

3.3 Installing the Tray Pan, Draft Shield and Pan Support

Lift the cover straight up and Install the tray

pan in the base of the heating chamber.

Install the draft shield (only one position

possible) on top of the tray pan.

Install the pan support into position. Turn the

pan support until it engages. In the locked

position, the arm of the pan support points

directly towards the front of the analyzer.

3.4 Leveling the Moisture Analyzer

Exact horizontal positioning and stable installation are prerequisites for repeatable results.

To compensate for small irregularities or inclinations at the location, the instrument can be

leveled.

Adjust the leveling feet of the Moisture

Analyzer until the air bubble in the

indicator is centered. The level indicator is

located under the cover towards the rear of

the Moisture Analyzer.

Attention: The instrument should be

leveled each time its location is changed.

For more information about leveling, check

section 6.6.2 for details.

Leveling

Indicator

Leveling

Feet

Содержание MB120













































































Результаты поиска

Содержание MB120

Отзывы:

Похожие инструкции для MB120

Бренды по названию

Популярные бренды

OHAUS MB120, Инструкция по эксплуатации

Результаты поиска

Содержание MB120

Отзывы:

Похожие инструкции для MB120

Бренды по названию

Популярные бренды