OHAUS Guardian 3000, Инструкция по эксплуатации

Страница: 14 / 196

EN-12 Guardian
TM
Hotplate-Stirrers
When heating and stirring a reaction vessel within an oil bath or similar set-up, the
stirring function will stir up to approximately one inch (2.5 cm) from the top plate.
The stirring speed will vary according to liquid viscosity, spin bar length, and
distance from top plate. Adjust one or all of these to achieve the desired stirring
speed. For example: the closer the reaction vessel is to the top plate, the strong the
magnetic connection between the unit and the stir bar.
3.4. Controlling the Top Plate Heater
1 Rotate the left knob to control the heat setting.
a)
Clockwise rotation will increase the heat setting.
b) Counterclockwise rotation will decrease the heat setting.
2 To turn on the heater, press and hold the left knob until the unit beeps and the
illuminates.
a) The unit will beep once to confirm the heater has been turned on.
b) The on the control panel will illuminate to indicate that the heater is
running.
c) During heating, the current heater temperature and the set target
temperature along with the
Heat Setting Indicator will be alternately
displayed on the screen, while the will blink.
d) When temperature is reached stably, the screen will display the current
heater temperature and the will stay illuminated.
e) When the heater temperature is above 40°C, the on the control
panel will be illuminated.
