OHAUS Courier 7000, Инструкция по эксплуатации

Страница: 11 / 63

Courier 7000 EN-7
2.3 Setup
2.3.1 Power Supply Connection
The Type-C cable and the AC adapter can supply power to the scale.
USB Power
1. Use the Type-A end of the USB cable to connect to the
PC.
Type-C
2. Use the other side of the USB cable to connect the
terminal through the mounting hole in the bracket.
AC Adapter Power
1. Use the Type-A end of the USB cable to connect to
the AC adapter.
2. Use the other side of the USB cable to connect the
terminal through the mounting hole in the bracket.
3. Plug the AC Adapter into the electrical outlet.
Type-C
Dry Battery Power
4 disposable AA size dry batteries (not included) can supply power to the scale.
1. Loosen the 2 screws on the terminal mounting bracket
to remove the terminal.
2. Install the batteries in the battery compartment.
The battery symbol indicates the battery status:
Battery 5%~25% remaining Battery 50%~75% remaining
Battery 25%~50% remaining Battery 75%~100% remaining
2.3.2 PC Connection
USB to PC
USB is the preferred method of connection. If you connect a USB cable to the PC, it allows the USB
communication with the PC.
NOTE : The USB cable to a PC connection can supply power to the scale as well.
1. Use the Type-A end of the USB cable to connect to the
PC.
Type-C
2. Use the other side of the USB cable to connect the
terminal through the mounting hole in the bracket.
PC
Type A
Mounting hole
Battery
PC
Mounting hole
AC adapter
Mounting
hole
Type-A