OHAUS Courier 3000, Инструкция по эксплуатации

Страница: 7 / 17

Courier 3000 EN-3
1.3. Overview of Parts and Controls
Figure 1-1 Courier 3000
Item Description Item Description
1 Front housing 3 Load cell cable connector
2 Control panel 4 Power port
1.4. Control Functions
Figure 1-2 Courier 3000 Control Panel
Button
Primary
Function
(Short Press)
On/Zero
If the scale is off, short press to turn on the scale.
When the weight on the platform is less than or
equal to 2% of the Capacity value, a short press will
zero the instrument display.
When the weight on the platform is greater than 2%
of the Capacity value, a short press will set the tare
weight.
During the calibration, short press this button to
capture the zero and the linearity calibration points.
In Display Hold mode, short press this button to
clear the reading shown on the instrument display.
Units/Hold
Enter/exit the hold mode.
Secondary
Function
(Long Press)
Off
If the scale is on, long press to turn off the scale.
Cal
Changes the weighing unit.
Long press two buttons to enter
the calibration mode.
NOTE:
• Short Press: Press the key less than 3 seconds.
•
Long Press: Press and hold the key for more than 3 seconds.
1
2
4 3