OHAUS CKW-55, Инструкция по эксплуатации

Страница: 38 / 68

EN-34 CKW-55 CHECKWEIGHER
Baud Rate
This menu item is used to define Baud rate. Selections are: 300, 600, 1200, 2400, 4800, 9600
or 19200.....
Parity
This menu item is used to define parity. Selections are: None, Odd or Even.
Data Length
This menu item is used to define data length. Selections are: 7 77
77 or 8.
Stop Bit
This menu item is used define the number of stop bits. Selections are: 1 or 2 .
Handshake
This menu item is used to define the flow control method used during serial communication.
Selections are:
None or XON/XOFF (ON-OFF).
Address
This menu item is used to define the identifying scale address used during RS485
communication. Selections are:
Off = When Off is selected, communication format is compatible with RS422.
On = Communication format is compatible with RS485.
An adress parameter from: 00, 01 ,...,99 can be entered.
Note : RS485 operation, the correct address must precede all data to the scale. When the scale
transmits, this same address is sent out first to identify where the data string came from.
Alternate Command
This menu item is used to define alternate command characters for Print, Tare and Zero.
Select the command name, then enter the corresponding ASCII code for the desired character via
the numeric keypad. Then press the
Yes button. Refer to Table 6-2 for a list of ASCII codes and
their equivalent characters.
Note : An ASCII code cannot be selected if already used for another function.
END
Represents the end of the menu.