AS20 Compact Stirrer
EN-5
2. OPERATION
2.1
Connection
Take out the supplied power cord, and connect each interface to the places according to
the illustration below.
Figure 1-2 Power cord connection
2.2
Operation
1.
Connect the stirrer to a bench meter and power supply using the supplied power
cord demonstrated in
section 2.1
. The power indicator lights up when power is on.
2.
Press the power button to turn on the stirrer. The display shows the speed of last
time.
The operation indicator then flashes after 3 seconds while the speed displayed
starts to increase until the speed of the last time is displayed. The operation
indicator thus becomes steady on.
3.
You can press or slide the speed control to adjust stirring speed.
a)
Press and hold the left side to decrease speed.
b)
Press and hold the right side to increase speed.
c)
Slide from left to right to increase speed slightly. (10
– 40 rpm each time)
d)
Slide from right to left to decrease speed slightly. (10
– 40 rpm each time)
Connect to the
DC interface of
the bench meter
(Power supply
interface)
Connect to the
interface of the
power adapter
of the bench
meter
Connect to the
AS20 stirrer's
interface
DC
Содержание AS20
Страница 2: ......
