10
Secure the cassette on the printer head.
The procedure may be repeated several
times until it is easy to push the left end of
the cassette onto the axle of the gear.
Then, press down on the right end of the
cassette with the right thumb as shown in
the illustration.
Sometimes, the cassette is put in cor-
rectly, but part of the ribbon rides up over
the printer head. This may be cause by
two reasons: 1. The paper has been
loaded before the ribbon. Remove paper
and try again. 2. The ribbon is a used one.
Re-place with a new cassette.
4. Install the removable cover plate. Place
the plate on the guide slot. Push into place
as gently as shown in the illustration.
Press down the right end with thumb
Cover plate installation
