Quick Start Guide
Defender
™
5000
Ohaus Corporation www.ohaus.com
iii
Defender
™
5000
(with T51 Indicators)
OPERATION
On/Off:
To turn Indicator on, press
ON
. Indicator runs a display test,
shows a series of informational displays, and enters active weighing mode.
To turn Indicator off, press and hold
Off
until
OFF
appears.
Press
ZERO
to zero the weight display. Scale must be stable.
Scale zeros automatically at Power On.
Manual Tare:
If weighing an item in a container, place empty container on
the scale. Before taring, container’s weight is shown (example 0.5 kg).
Press
TARE
. Display shows zero.
(If container is removed, display shows container’s weight as negative.)
To clear the Tare value, empty the scale and press
TARE
.
The display shows gross weight (zero if scale is empty).
Weighing:
Place the item to be weighed on the scale.
(Sample shown: 1.5 kg, Gross weight.)
Verify the indicator: place a known mass on the scale and check if the reading is accurate.
If not, calibrate, using the Calibration Guide.
ADDITIONAL OPERATIONS
Changing Units of Measure:
Press and hold
Units
until the desired
measuring unit appears. Only measuring units enabled in the Unit Menu are
displayed.
(See back page.)
Printing Data:
Press
PRINT Units
to send displayed data to the communication port.
(Auto-Print Mode must be Off).
Communication parameters in the Print and Communication Menu must be set.
(See Instruction Manual)
.
Application Modes:
Press and hold the
Mode
button until the desired
application mode appears.
WEIGH
is default mode.
To have other modes accessible through
Mode
button, first turn
them On in the MODE menu.
(See back page.)
When modes are On, choose by toggling through available options
by pressing
Mode
.
For details on various application modes, see Instruction Manual.
Weigh
Count
Percent
Dynamic
Checkweigh
Off,
On
Off
, On
Off
, On
Off
, Manual
Off
, On
Calle 23B No. 81A - 62 Modelia PBX: (571) 410 28 48 Fax: (571) 263 72 24 Bogotá, D.C. - Colombia.
www.tecnipesaje.com [email protected] [email protected]