OHAUS 5000, Руководство оператора, Страница: 9 / 28

9
12/10
2.4 Inserting the batteries
1. Make sure that the external power supply is disconnected.
2. Remove the weighing pan.
3. Remove the battery compartment cover.
WARNING
Damage to the battery if it is incorrectly installed.

Pay attention to the correct battery polarity.
If the positive pole (+) and the negative pole (–) are connected
wrongly, the display will show "-------".
After six seconds warning alarm, the scale will turn off automatically.

Only use original manufacturer batteries.
4. Place the battery in the compartment so that the terminal ends
face upwards.
5. Connect the red terminal end to the positive pole (red or +) and the
black terminal end to the negative pole (black or –).
6. Close the battery compartment.
7. Put the weighing pan back on.
• The battery life is affected by charging and discharging conditions.
• If correctly used, the battery life can reach approx. 300 charging
cycles.
• The battery's operating time is reduced when the battery has not been
used over a longer period of time (two months).
• It is recommended that the battery be charged at least every 3 months.
• If the battery was not used over a longer period of time, then charge
the battery at least three times and use it until it is completely
discharged.
• The charging time decreases if the battery is not fully discharged.
• 6V Lead Acid batteries
OHAUS
Operator Manual Aviator 5000 Order number 72246393