Ogura Industrial Corp, Somerset, NJ, USA www.ogura-clutch.com
(c) Is there any abnormal noise or overheating?
If you continue to operate and the casing temperature rises too high, check that the load is
below the allowable power in the catalog.
3-4. Maintenance and Inspection
In order to keep the clutch and brake in a normal state at all times, perform the following
maintenance and inspection regarding the clutch and brake.
1) Protection
Do not allow water or oils to adhere (do not apply).
Since this clutch / brake is for dry type, if oils adhere to the friction surface, the torque
will be significantly reduced and the function of the product will be impaired. Therefore,
never use water or oils. If you use it in a place where oil or water can easily get in, attach
a protective cover.
Make sure to supply the specified voltage.
The engagement time and torque of clutches and brakes change depending on the
exciting voltage. Also, if the exciting voltage is too low, the clutch and brake will not be
able to engage, so be sure to supply the specified voltage. Even if the power supply
voltage is as specified, if the circuit is long, the voltage will drop due to line resistance,
so check the voltage at the clutch / brake terminal when the power is on.
