EN
24
25
Bluetooth connection and pairing
TWS mode
Note:
the left earbud is dominant during TWS mode.
•
TWS connection between the left and right earbuds
When the two earbuds are removed from the charging case, the LED indicator lights flash
blue and the connection between the left and right earbuds is established automatically.
•
Bluetooth pairing with the phone
Next, the earbuds enter pairing mode, the LED indicator light of the dominant earbud
(left) alternately flashes blue and white, and the indicator light of the second earbud (right)
goes off. Access the Bluetooth settings of your phone and select “Oglo Muz TWS 2” from
the list of devices.
•
Connection established
A beep (“Ding”) in the main earbud (left) means that the connection has been established.
Then the indicator light goes off.
Oglo Muz TWS 2
TWS connection
•
Automatic reconnection
Once removed from the charging case, the left and right earbuds connect automatically
to one another, before reconnecting automatically, in Bluetooth mode, to the last paired
phone.
Factory reset
I f
one of your earbuds (or both) is unresponsive or fails to connect, please follow the following
reset instructions:
•
Before you start, don’t forget to delete “Oglo Muz TWS 2” from the list of devices in the
Bluetooth settings of your smartphone.
•
Place your earbuds in the charging case, make sure they are charging, then press and
hold the two earbuds for eight seconds until the LED indicator lights flash blue and white
three times.
