Daily Cleaning* & Maintenance
*When
fi
nished using unit for the day the clean solu
�
on tank should be almost completely
empty. Recommend ini
�
ally prac
�
cing with plain water to get an idea of how much cleaning
solu
�
on to start with.
Step 1: Flush Pump & Solu
�
on Line
Fill empty Clean Solu
�
on tank with 1 gallon of plain water
Turn on PUMP switch only
Place vacuum head in empty catch basin
Pull trigger un
�
l most of water has sprayed into catch basin & spray
starts to diminish
NOTE: NEVER RUN PUMP DRY
Turn o
ff
PUMP switch
Step 2: Flush Vacuum Hose Assembly
Turn on VACUUM switches only
Vacuum up solu
�
on in catch basin from previous step with air
NOTE: DO NOT COMPLETELY SUBMERGE VACUUM HEAD
(The goal is to create turbulence to dislodge any dirt, hair & debris that
may accumulate inside the vacuum hose and pipe by su
c�
oning 50:50
liquid/air)
Turn o
ff V
ACUUM switches
Step 3: Clean Floor Cleaning Tool Assembly & Vacuum Hose
Disconnect metal pipe & solu
�
on line from black plas
�
c handle
Use clean rag soaked with disinfectant solu
�
on to clean the squeegee,
brush, wheels, vacuum head & pipes removing any hair present (If needed
use
a fla
t head screwdriver ‘pop’ the wheels out to remove any hair caught
around the axels then ‘pop’ back into place)
Using a glov
ed fi
nger check inside vacuum head (at the joint) for any hair or
debris accumu
la�
on
Store with squeegee/brush o
ff fl
oor to prevent damage
Disconnect vacuum hose & solu
�
on line from ANIVAC unit
Wipe exterior of hose/line with disinfectant soaked rag
Hang on designated hose rack
Chama Gomez
Technical Field Specialist
United States
855-900-8822 x 227
cgomez@ogenasolu
�
ons.com
Ogenasolu
�
ons.com
Содержание ANIVAC ProHeat II
Страница 3: ......
