WRENCH
9/16"
RATCHET WRENCH
9/16"
HEX SOCKET OR ALLEN KEY
7/32"
HAMMER DRILL
(MASON BIT SIZE THAT
MATCHES CHOSEN ANCHOR)
PENCIL
LOCK WASHER
3/8"
FLAT WASHER
3/8"
HEX NUT
3/8"
HEX BOLT
3/8"
LOCTITE
(OPTIONAL)
WWW.MAGLIN.COM
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF MAGLIN SITE FURNITURE INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF MAGLIN SITE FURNITURE INC. IS PROHIBITED.
!CAUTION!
FAILURE TO FOLLOW INSTRUCTIONS COULD LEAD TO INJURY, ENSURE ALL STEPS ARE FOLLOWED AND FASTENERS ARE USED, TWO OR MORE PEOPLE ARE REQUIRED FOR INSTALLATION
!CAUTION!
NOTE THAT THE ASSEMBLY THREADED STUDS ONLY AID IN THE ASSEMBLY PROCESS. PARTS SHOULD NOT BE LEFT UNATTENDED AND SHOULD BE BOLTED TOGETHER IMMEDIATELY AFTER
PARTS ARE PLACED IN DESIRED LOCATION AS SEATING IN NOT SAFE FOR USE UNTIL FULLY FASTENED TOGETHER AND ANCHORED DOWN.
!CAUTION!
ALL ASSEMBLIES REQUIRE ADEQUATE ANCHORING TO AN APPROPRIATE SUBSTRATE. DO NOT LEAVE BEANCE FREE STANDING. IT IS THE INSTALLERS RESPONSIBILITY TO USE APPROPRIATE
ANCHORS AND IDENTIFY AN APPROPRIATE SUBSTRATE.
TOOLS (NOT SUPPLIED):
FASTENERS (SUPPLIED):
NOTES:
NOTE THAT QUANTITIES VARY DEPENDING ON THE CHOSEN LAYOUT
